STA140QR ENGLISH WHEEL
INTERNATIONAL ENQUIRIES CLICK HERE
STA140QR ENGLISH WHEEL
Stakesy's English Wheel for shaping steel and aluminium sheet metal for automotive, motorcycle and aviation work.
This is essentially the same model as the STA140 english wheel with an improved quick release system to allow fast material entry and exit without adjusting the pressure. There are many designs of quick release and this type was by far the most efficient for the cost increase.
Fabricated from 3" x 2" x 4mm steel box section for rigidity and fully gussetted to prevent flex, we have designed this machine to be both affordable and yet strong enough for even large 18 gauge steel panelwork.
It comes complete with 6 anvils (rads and contact blow details are given below), stand and quick release mechanism. The 7" x 2" upper wheel is machined from EN8 steel with a ground finish and the lower anvils are also from EN8 with a ground finish and measure 2" wide by 3" diameter. The throat depth is 560mm (22") from centre of anvils to the back of the frame.
All lower anvils are now machined with a "contact blow". This is a small flat on the lower anvil blended into the radius. It makes for much easier overlaying of passes and is the norm on higher end US made wheels. The with of the "blow" is radius dependant and the details can be seen on the chart below. The result is much easier wheeling and a better quality job - no downside.
There are many E-wheels advertised on ebay and its difficult to know what you are getting from a few photos. We are fabricators ourselves and only supply kit we would happily use on our racing car and motorcycle projects. Where we think our wheel surpasses others in the same price range are as follows:
Top Wheel is machined from billet and has minimal vertical and lateral runout of less than 0.15mm. We have seen ebay upper wheels at the car shows move up and down by about 1.5mm and side to side like an old cart wheel.
Our top wheel and anvils are ground finish. Some of the competition use a chrome finish which can chip rendering them scrap.
When you hold our lower anvil saddle it will rotate only about 2-5 degrees and can be dialled down even less by fettling the grub screw. Others we have seen will twist up to about 45 degrees left and right.
At the NEC Classic Car show in November 2011 we sold one of these wheels from our stand to Alan Floyd of Classic Car Panel repairs who is a team member of the Leeds University Bodywork Restoration Course at the NEC show each year. He has a great experience using many cast and fabricated wheels and uses a large cast iron Kendrick wheel in his business. Alan wanted a mobile wheel for transporting to customers premises and said it was the best he had tried from all the wheels in this price range.
Lastly we have a demo in Leicestershire so come and try it out. 01509 812171 or 07970 958161
Comes sub-assembled in wooden packing case and takes less than 30 minutes to fully assemble.
- Heavy duty gussetted frame
- Stand included
- 6 x EN8 lower anvils included with contact flats
- Quick release flip over lower anvil holder
- Leadscrew lock
- 7" solid billett upper wheel
- Roller bearings throughout
- Anvil rack
| Product Code | STA140QR |
| Capacity Mild Steel | 1.2mm |
| Capacity Aluminium | 2.0mm |
| Throat Depth | 560mm (22") |
| Upper Wheel Size | 7" x 2" |
| Lower Anvil Sizes | 3" x 2" |
| Dimensions L x W x D (cm) | 86 x 70 x 136 |
| Gross / Net Weights | 85 / 70kg |
| Packing Dimensions (cm) | 84x74x33 |
| Weight | 85kg |
| Lower Anvil Details | Contact Blow |
| R50 (50mm radius) | 4.0mm |
| R100 (100mm radius) | 6.35mm |
| R200 (200mm radius) | 7.2mm |
| R300 (300mm radius) | 8.5mm |
| R400 (400mm radius) | 12.0mm |
| FLAT | Edges radiussed 6mm |
Credit Card Payments
We accept payments through Opayo's Hosted Payment Page. When you make a payment, some of your data will be shared with Opayo, including necessary information like the purchase total and billing details. A credit card (Mastercard or Visa) or debit card is required for all online transactions, and payments are processed through secure servers.
We do not have access to your credit card information and cannot charge you any additional amounts. Your security and privacy are our top priorities.
If you have any questions about the payment process, please don't hesitate to contact us
PayPal Payments
We accept payments through PayPal Hosted Payment Page. When processing payments, some of your information will be used to process the payment.
Payments Compliance
All payments made to Stakes Limited t/a Stakesys Metalwork Machinery are protected by the Consumer Credit Act 1974, Section 75. United Kingdom.
Stakes Limited t/a Stakesys Metalwork Machinery takes online payments seriously and are fully PCI compliant in accordance with the card payment industry. Our website undergoes quarterly PCI scans via WorldPay SafePay..
| Manufacturer | Stakesys |
|---|
See our full Delivery & Returns information here.
Delivery & Returns
Items under 30kg will be shipped by either 24hr courier or 1st class Royal Mail depending on item and weight and size.
All orders will be packaged and despatched same or next day. Orders made later in the day will most likely be sent out the following day.
We use a Next Day Delivery service however this service is subject to stock, courier availability and courier area. A signature is required for courier deliveries so please arrange for someone to be in at delivery address.
Delivery prices are calculated by total order weight & size and are as follows:
|
Weight |
UK Mainland |
Highlands & Islands |
|
0-2kg |
£4.50 |
£4.50 |
|
2.01-30kg |
£4.50 |
£21.50 |
|
31-45kg |
£19.50 |
£31.50 |
|
45kg + |
£55 |
Various |
Buying from outside GB Mainland.
We are happy to deliver worldwide upon request. Because of the many variables involved our website cannot calculate global shipping or deduct UK Tax, please call on +44 1509 812171 or email info@stakesys.co.uk and we will work out the best price for you.
Heavy Goods Items/ Pallets
If you are ordering to Mainland UK or Highlands and Islands, once added to your basket, our shipping calculator will work out a shipping price depending on your delivery post code. Delivery can take up to 4 working days from point of order but is often sooner depending on location. We will call to let you know estimated delivery date, you may be required to help the driver move the product from the roadside to your desired location, please ensure somebody is in to receive the goods as there is a redelivery charge of £30 should you miss it.
We also ship heavy goods and pallets worldwide, however not through the website, please call on +44 1509 812171 or email info@stakesys.co.uk.
Returns Policy
Stakesy’s Guarantee: 14 Day Money Back Guarantee
1/ Items returned under the 7 working day cancellation period
If for any reason you are unhappy with your purchase, you can return it to us in its original condition within 7 days of the date you received the item, unopened (with any seals and shrink-wrap intact) and we will refund the cost of the item and the cost of sending the item to you as follows:
-where you are returning an item that was part of a larger order, we'll refund the per-item charge for delivery that you incurred -where you are returning an entire order, we'll refund all delivery charges that you incurred -we will refund only standard shipping charges for items delivered mainland UK (excluding Highlands & islands and orders over 25 kilos in weight)
2/ Items returned under 14-day returns guarantee
Where you are withdrawing from your purchase between 7 and 14 days after delivery, and there has been no error on our part, we will refund only the cost of the item minus 10% handling charge. We will not refund the cost of delivery or other services provided to you in connection with your purchase.
3/ Any goods items over 60 kg that have incurred special freight charges are excluded and the buyer will be responsible for both arranging and the costs of the return delivery.
Refunds will be paid within thirty days of cancellation.
Please post goods to be returned or exchanged to:
Stakesy’s Metalwork Machinery, Unit 12 Hayhill Industrial Estate, Loughborough, LE12 8LD.
It is crucial that you pack the goods to be returned the same way as we sent out. Please consider that a returned item that is damaged in return transit may well be un-refundable if we cannot re-sell. Please include a note of your requirements and original invoice number.