We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
JD SQUARED MODEL 32 TUBE BENDER PACKAGES
made in
the
United States
Calculate UK Shipping below
Like it? share it!
INTERNATIONAL ENQUIRIES CLICK HERE
Original JD Squared Model 32 Tube Bender, Dies and Stand (made in the USA)
SAVE UP TO 10% ON INDIVIDUAL PRODUCT PRICES
The world's most popular roll cage tube bender. The fantastic Model 32 ratchet tube bender is essentially, a heavy-duty version of the JD2 Model 3 bender (made for over 40 years in the USA) with extra features built in.
Bend from 1/2" to 2.0" x 3.2mm wall steel by hand, and up to 2.5" x 3.2mm with one of our hydraulic upgrade options. JD Squared make over 300 dies for the Model 32 in imperial and metric tube, Imperial and metric Square Box & Imperial and Metric PIPE (CHS black steel)
The Model 32 was built from the ground up to take hydraulics and features a lug for a trunion mount built into the main frame. Another feature of the Model 32 is the built in anti-springback feature. This consists of 2 parts; a second toothed locking rack, and a drop pin assembly, both of which keep the bending process travelling in the forwards only direction which helps prevent crinkling on thin-walled tubing.
The Model 32 bender is manufactured from thicker and wider plates than its smaller brother. Larger pins are used for its maximum capability of 2.5" (with hydraulics). In its manual guise the hand ratchet assembly is brass bushed for a smoother operation and the ratchet ratio is increased over the Model 3 making it 20% easier to pull by hand.
LARGE CAPACITY - Bends round tubing and pipe from 1/2" to 2 1/2" O.D. and square tubing from 1/2" to 1-1/2". This bender is rated to bend 2" o.d. x .250" wall CDS steel tubing. Also capable of solid steel up to 1 1/2" diameter. NOTE: To bend round tubing over 2" o.d. x .120" wall, square tubing over 1 1/2" or solids over 1" diameter requires hydraulics.
EASY OPERATION – The Model 32 uses a high-ratio ratchet mechanism to allows the operator to bend larger tubing sizes comfortably without assistance. For example, the average operator can bend up to 2.0" od tubing with a 3.2mm wall. 1.25" x 2.0mm sized mild steel tubing can be bent with one hand and 1" x .065" wall tubing with ONE finger. Dies can be changed in under 30 seconds. Bend times are typically in the 30-60 second range for 1" O.D. and above tubing using the ratchet mechanism. Hydraulics may be slightly slower or faster depending on the power unit chosen.
HIGHLY ACCURATE - With the degree indicator standard on every Model 32, accurate bending is simply a matter of watching the pointer until the degree of bend you desire is reached. High contrast yellow markings on a black wheel provide excellent readability while bending. Simply loosen the lower nut as shown in the picture to the right, rotate the degree wheel to zero degrees and using finger force only, tighten in position.
The Model 32 is our favourite JD Squared product and does a great job, both for the home fabricator and professionals alike. Like the Model 3, the Model 32 has over 300 available die sets which should cover all your projects from a boat handrail to a World Rally car chassis.
Many copies have been made of the JD Squared Model 3 & Model 32 benders over the years, both at home and overseas. For quality, strength and resale value, why choose anything else? Thousands of customers can't be wrong.
Whats included:
- JD Squared Model 32 Manual Tube Bender
- 3 x Original JD Squared Dies Sets (as chosen on dropdown)
- Stakesys Powder Coated Petal Head Stand
Why JD Squared:
- The Original - Made in the USA
- Bend up to 2.0" steel & aluminium by hand
- Anti-springback system for thin wall and chromoly
- Over 300 dies available
- Designed to upgrade to hydraulics if required
- Tough crinkle finish powder coating
| Package ID | Contains | Min wall in Mild Steel |
| Imperial Tube Package 1 |
0.75" x 2.25"R 1.00" x 3.0"R 1.25" x 3.5"R |
1.5mm 1.5mm 2.1mm |
| Imperial Tube Package 2 |
1.00" x 3.0"R 1.25" x 3.5"R 1.50" x 4.5"R |
1.5mm 2.1mm 2.6mm |
| Imperial Tube Package 3 |
1.25" x 3.5"R 1.50" x 4.5"R 1.75" x 5.5"R |
2.1mm 2.6mm 2.6mm |
| Imperial Tube Package 4 |
1.50" x 4.5"R 1.75" x 5.5"R 2.00" x 6.5"R |
2.6mm 2.6mm 3.2mm (or 2.64mm in our ROPT Tubing) |
| Metric Tube Package 5 |
20mm x 76mmR 30mm x 114mmR 40mm x 140mmR |
1.5mm 2.1mm 2.1mm |
| Metric Tube Package 6 |
25mm x 76mmR 38mm x 114mmR 45mm x 140mmR |
1.5mm 2.6mm 2.6mm |
| Metric Tube Package 7 |
30mm x 114mmR 40mm x 140mmR 45mm x 140mmR |
2.1mm 2.1mm 2.6mm |
| CHS Hot Rolled Pipe Package 8 |
21.3mm x 76mmR 26.9mm x 76mmR 33.7mm x 89mmR |
1.5mm 2.1mm 2.6mm |
| CHS Hot Rolled Pipe Package 9 |
26.9mm x 89mmR 33.7mm x 114mmR 42.4mm x 140mmR |
1.6mm 2.1mm 2.6mm |
| CHS Hot Rolled Pipe Package 10 |
33.7mm x 114mmR 42.4mm x 140mmR 48.6mm x 165mmR |
2.1mm 2.6mm 3.2mm |
| Product Code | JDSQM32-PACKAGE |
| Capacity - Mild Steel by Hand | 2.0" (50.8mm) x 3.2mm wall |
| Capacity - Mild Steel with optional hydraulics | 2.5" (63.5mm) x 3.2mm wall |
| No Load RPM | 1700 rpm |
| Dims for Shipping |
Box 1 - 52 x 22 x 16cm - 32kg Box 2 - 40 x 40 x 12cm - 20kg Box 3 - 40 x 40 x 30cm - 25kg Box 4 - 95 x 24 x 24cm - 15kg |
Credit Card Payments
We accept payments through Opayo's Hosted Payment Page. When you make a payment, some of your data will be shared with Opayo, including necessary information like the purchase total and billing details. A credit card (Mastercard or Visa) or debit card is required for all online transactions, and payments are processed through secure servers.
We do not have access to your credit card information and cannot charge you any additional amounts. Your security and privacy are our top priorities.
If you have any questions about the payment process, please don't hesitate to contact us
PayPal Payments
We accept payments through PayPal Hosted Payment Page. When processing payments, some of your information will be used to process the payment.
Payments Compliance
All payments made to Stakes Limited t/a Stakesys Metalwork Machinery are protected by the Consumer Credit Act 1974, Section 75. United Kingdom.
Stakes Limited t/a Stakesys Metalwork Machinery takes online payments seriously and are fully PCI compliant in accordance with the card payment industry. Our website undergoes quarterly PCI scans via WorldPay SafePay..
Write Your Own Review
See our full Delivery & Returns information here.
Delivery & Returns
Items under 30kg will be shipped by either 24hr courier or 1st class Royal Mail depending on item and weight and size.
All orders will be packaged and despatched same or next day. Orders made later in the day will most likely be sent out the following day.
We use a Next Day Delivery service however this service is subject to stock, courier availability and courier area. A signature is required for courier deliveries so please arrange for someone to be in at delivery address.
Delivery prices are calculated by total order weight & size and are as follows:
|
Weight |
UK Mainland |
Highlands & Islands |
|
0-2kg |
£4.50 |
£4.50 |
|
2.01-30kg |
£4.50 |
£21.50 |
|
31-45kg |
£19.50 |
£31.50 |
|
45kg + |
£55 |
Various |
Buying from outside GB Mainland.
We are happy to deliver worldwide upon request. Because of the many variables involved our website cannot calculate global shipping or deduct UK Tax, please call on +44 1509 812171 or email info@stakesys.co.uk and we will work out the best price for you.
Heavy Goods Items/ Pallets
If you are ordering to Mainland UK or Highlands and Islands, once added to your basket, our shipping calculator will work out a shipping price depending on your delivery post code. Delivery can take up to 4 working days from point of order but is often sooner depending on location. We will call to let you know estimated delivery date, you may be required to help the driver move the product from the roadside to your desired location, please ensure somebody is in to receive the goods as there is a redelivery charge of £30 should you miss it.
We also ship heavy goods and pallets worldwide, however not through the website, please call on +44 1509 812171 or email info@stakesys.co.uk.
Returns Policy
Stakesy’s Guarantee: 14 Day Money Back Guarantee
1/ Items returned under the 7 working day cancellation period
If for any reason you are unhappy with your purchase, you can return it to us in its original condition within 7 days of the date you received the item, unopened (with any seals and shrink-wrap intact) and we will refund the cost of the item and the cost of sending the item to you as follows:
-where you are returning an item that was part of a larger order, we'll refund the per-item charge for delivery that you incurred -where you are returning an entire order, we'll refund all delivery charges that you incurred -we will refund only standard shipping charges for items delivered mainland UK (excluding Highlands & islands and orders over 25 kilos in weight)
2/ Items returned under 14-day returns guarantee
Where you are withdrawing from your purchase between 7 and 14 days after delivery, and there has been no error on our part, we will refund only the cost of the item minus 10% handling charge. We will not refund the cost of delivery or other services provided to you in connection with your purchase.
3/ Any goods items over 60 kg that have incurred special freight charges are excluded and the buyer will be responsible for both arranging and the costs of the return delivery.
Refunds will be paid within thirty days of cancellation.
Please post goods to be returned or exchanged to:
Stakesy’s Metalwork Machinery, Unit 12 Hayhill Industrial Estate, Loughborough, LE12 8LD.
It is crucial that you pack the goods to be returned the same way as we sent out. Please consider that a returned item that is damaged in return transit may well be un-refundable if we cannot re-sell. Please include a note of your requirements and original invoice number.