SWAG 40 TON 40" HEAVY DUTY FINGER BRAKE DIY BUILDER KIT
made in
the
United States
INTERNATIONAL ENQUIRIES CLICK HERE
SWAG OFFROAD (USA) 40" Finger Press Brake DIY Builder Kit, with Adjustable Back Stop
Press brake kit comes un-assembled, you do the final assembly and welding.
You asked for it ... & here it is.
Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die. The kit is shipped with fingers in the following sizes, 1", 2", 3", 4", 9.5" & 17" long.
This 40" press brake kit will bend steel up to 37.5" wide and is designed to fit in hydraulic presses that are at least 40" wide between the vertical beams, however it kit can easily be cut down or modified to accommodate smaller presses.
Note: The max bending width and thicknesses are determined upon your hydraulic press and thus actual numbers are dependent upon your press. But with ample tonnage and proper support, this brake will bend up to 1/4" of A-36 steel full width. We recommend 40 tons; (2 x 20 ton jacks spaced evenly works great).
Tools required for assembly: welder, grinder, level, small square.
If you are looking for a press that is compatible with our 40" press brakes consider the following two options: Harbor Freight 50 Ton Press and the Grizzly 50 Ton Press. They are an easy out of the box solution. The frames of these two units are not wide enough to utilize the full capacities of the 40" brakes, however the vertical beams of the brakes are open, this allows the 40" brake to stick through both sides of the frame. The maximum usable width between the frame rails is 32.25" wide for both the Harbor Freight and the Grizzly H frame presses.
Note: Some minor modifications may be necessary or items may need to be relocated, such as the manual pump or the hand crank winch if using the 40" wide brake on these H frame presses.
Note: The springs provided with the kit are not intended to fully lift the top die. They are just to assist with assembly. We recommend adding expansion spring from the top of your press frame to assist in lifting the top assembly.
If you are looking to make your own dedicated frame for the SWAG 40" brakes check out the link below for a fully detailed list of materials needed to create your own I beam press brake stand, which is less work than you may think and is fairly inexpensive, considering what it allows you to create.
Link for details on making your own press frame: Click Here
Link for assembly instructions: Click Here
| Product Code | SWAG40TFBK |
| Max Capacity at 37.5" in Mild Steel | 1/4" (dependant on frame and tonnage) |
| Max Bending Width | 37.5" |
| Total Width of Brake | 40.0" |
| Finger Widths | 1",2",3",4",9.5",17" |
| Maximum Bend Angle |
110° |
| Weight & Packing Dims |
2 x boxes ( |
Credit Card Payments
We accept payments through Opayo's Hosted Payment Page. When you make a payment, some of your data will be shared with Opayo, including necessary information like the purchase total and billing details. A credit card (Mastercard or Visa) or debit card is required for all online transactions, and payments are processed through secure servers.
We do not have access to your credit card information and cannot charge you any additional amounts. Your security and privacy are our top priorities.
If you have any questions about the payment process, please don't hesitate to contact us
PayPal Payments
We accept payments through PayPal Hosted Payment Page. When processing payments, some of your information will be used to process the payment.
Payments Compliance
All payments made to Stakes Limited t/a Stakesys Metalwork Machinery are protected by the Consumer Credit Act 1974, Section 75. United Kingdom.
Stakes Limited t/a Stakesys Metalwork Machinery takes online payments seriously and are fully PCI compliant in accordance with the card payment industry. Our website undergoes quarterly PCI scans via WorldPay SafePay..
| Manufacturer | SWAG |
|---|---|
| Material Type | . |
See our full Delivery & Returns information here.
Delivery & Returns
Items under 30kg will be shipped by either 24hr courier or 1st class Royal Mail depending on item and weight and size.
All orders will be packaged and despatched same or next day. Orders made later in the day will most likely be sent out the following day.
We use a Next Day Delivery service however this service is subject to stock, courier availability and courier area. A signature is required for courier deliveries so please arrange for someone to be in at delivery address.
Delivery prices are calculated by total order weight & size and are as follows:
|
Weight |
UK Mainland |
Highlands & Islands |
|
0-2kg |
£4.50 |
£4.50 |
|
2.01-30kg |
£4.50 |
£21.50 |
|
31-45kg |
£19.50 |
£31.50 |
|
45kg + |
£55 |
Various |
Buying from outside GB Mainland.
We are happy to deliver worldwide upon request. Because of the many variables involved our website cannot calculate global shipping or deduct UK Tax, please call on +44 1509 812171 or email info@stakesys.co.uk and we will work out the best price for you.
Heavy Goods Items/ Pallets
If you are ordering to Mainland UK or Highlands and Islands, once added to your basket, our shipping calculator will work out a shipping price depending on your delivery post code. Delivery can take up to 4 working days from point of order but is often sooner depending on location. We will call to let you know estimated delivery date, you may be required to help the driver move the product from the roadside to your desired location, please ensure somebody is in to receive the goods as there is a redelivery charge of £30 should you miss it.
We also ship heavy goods and pallets worldwide, however not through the website, please call on +44 1509 812171 or email info@stakesys.co.uk.
Returns Policy
Stakesy’s Guarantee: 14 Day Money Back Guarantee
1/ Items returned under the 7 working day cancellation period
If for any reason you are unhappy with your purchase, you can return it to us in its original condition within 7 days of the date you received the item, unopened (with any seals and shrink-wrap intact) and we will refund the cost of the item and the cost of sending the item to you as follows:
-where you are returning an item that was part of a larger order, we'll refund the per-item charge for delivery that you incurred -where you are returning an entire order, we'll refund all delivery charges that you incurred -we will refund only standard shipping charges for items delivered mainland UK (excluding Highlands & islands and orders over 25 kilos in weight)
2/ Items returned under 14-day returns guarantee
Where you are withdrawing from your purchase between 7 and 14 days after delivery, and there has been no error on our part, we will refund only the cost of the item minus 10% handling charge. We will not refund the cost of delivery or other services provided to you in connection with your purchase.
3/ Any goods items over 60 kg that have incurred special freight charges are excluded and the buyer will be responsible for both arranging and the costs of the return delivery.
Refunds will be paid within thirty days of cancellation.
Please post goods to be returned or exchanged to:
Stakesy’s Metalwork Machinery, Unit 12 Hayhill Industrial Estate, Loughborough, LE12 8LD.
It is crucial that you pack the goods to be returned the same way as we sent out. Please consider that a returned item that is damaged in return transit may well be un-refundable if we cannot re-sell. Please include a note of your requirements and original invoice number.
